For first time visitors I recommend this archive for some of my best posts.
2791. The idea here is to describe the purpose of the items mounted on the front of this bulldozer:
![]()
Larger image
2792. What is the reason for the small hole at the lower right of the dvd tray?
![]()
![]()
2793. Around 42" tall, take a look at Neatorama for more guesses and a chance to win one of their funny T-shirts:
![]()
![]()
Larger image
![]()
Larger image
![]()
Larger image
![]()
Larger image
2794. 4-1/2" long:
![]()
![]()
![]()
2795 Sent in by someone who is looking to identify this tool, the wedge and ring are made of metal:
![]()
2796. Approximately 12" long:
![]()
![]()
Answers:
2791. The devices attached to this bulldozer are Trimble gps units, they are part of "a full 3D control system that puts the site plan - design surfaces, grades and alignments - inside the cab."
![]()
Larger image
2792. The purpose for the hole is to allow the dvd drawer to be opened by inserting part of a paperclip into it, for use when the power is off or if there is a problem opening it with the button.
![]()
![]()
2793. This is a bonde cutter - the bonde is the tapered wooden plug (often a soft hardwood such as poplar) that fits into the filling hole of a wine barrel. The blade is at a slight angle from the vertical, and the vertical spindle which holds the blank rotates approx 1/40 revolution each stroke. It is missing its drive handle, and someone over-tightened the screw and broke the casting, hence the blacksmith made steel repair.
![]()
![]()
Larger image
![]()
Larger image
![]()
Larger image
![]()
Larger image
2794. This is a tire repair tool, it can be used with rubber bands and glue to seal a hole, patent number 1,313,868:
![]()
![]()
2795 No definitive answer yet for this one:
![]()
2796. An arm strength tester, compressing the handles will move the needle along the gauge, which can be then be compared to previous attempts:
![]()
![]()
Are you interested in Old Tools and Tool Collecting? Want to learn more about tools, and meet some great people who have the same interests? Please take a minute to check out the Mid-West Tool Collectors Web Site at this link: www.mwtca.org.
![]()
To submit photos, send them to the address in my profile, please include dimensions, any text on the item, and where it was found.
Last week's set is seen below, click here to view the entire post.
![]()
More discussion and comments on these photos can be found at the newsgroup rec.puzzles.
2791. The idea here is to describe the purpose of the items mounted on the front of this bulldozer:
Larger image
2792. What is the reason for the small hole at the lower right of the dvd tray?
2793. Around 42" tall, take a look at Neatorama for more guesses and a chance to win one of their funny T-shirts:
Larger image
Larger image
Larger image
Larger image
2794. 4-1/2" long:
2795 Sent in by someone who is looking to identify this tool, the wedge and ring are made of metal:
2796. Approximately 12" long:
Answers:
2791. The devices attached to this bulldozer are Trimble gps units, they are part of "a full 3D control system that puts the site plan - design surfaces, grades and alignments - inside the cab."
Larger image
2792. The purpose for the hole is to allow the dvd drawer to be opened by inserting part of a paperclip into it, for use when the power is off or if there is a problem opening it with the button.
2793. This is a bonde cutter - the bonde is the tapered wooden plug (often a soft hardwood such as poplar) that fits into the filling hole of a wine barrel. The blade is at a slight angle from the vertical, and the vertical spindle which holds the blank rotates approx 1/40 revolution each stroke. It is missing its drive handle, and someone over-tightened the screw and broke the casting, hence the blacksmith made steel repair.
Larger image
Larger image
Larger image
Larger image
2794. This is a tire repair tool, it can be used with rubber bands and glue to seal a hole, patent number 1,313,868:
2795 No definitive answer yet for this one:
2796. An arm strength tester, compressing the handles will move the needle along the gauge, which can be then be compared to previous attempts:
Are you interested in Old Tools and Tool Collecting? Want to learn more about tools, and meet some great people who have the same interests? Please take a minute to check out the Mid-West Tool Collectors Web Site at this link: www.mwtca.org.
To submit photos, send them to the address in my profile, please include dimensions, any text on the item, and where it was found.
Last week's set is seen below, click here to view the entire post.
More discussion and comments on these photos can be found at the newsgroup rec.puzzles.